Utilização do ensaio de flexão sobre amostra semicircular para avaliação da propagação do trincamento em misturas com diferentes ligantes

Authors

  • Luiza Carbunck Godoi Universidade Federal do Rio Grande do Sul
  • Lélio Antônio Teixeira Brito Universidade Federal do Rio Grande do Sul
  • Natália Guterres Mensch Universidade Federal do Rio Grande do Sul
  • Jorge Augusto Pereira Ceratti Universidade Federal do Rio Grande do Sul

DOI:

https://doi.org/10.14295/transportes.v27i4.1832

Keywords:

Cracking, EEFAS, EDFAS.

Abstract

This paper aims to investigate cracking propagation and asphalt mixtures failure. Cracking is considered one of the major distresses mechanisms affecting the serviceability and quality of flexible pavement structures. This study evaluated cracking resistance, as well as the principle of cracking propagation in hot mix asphalt with three different types of asphalt binders. The experiment was carried out by means of both static semi-circular bending test (EEFAS) and dynamic (EDFAS).  Therefore, this research investigated three asphalt concrete mixes, designed by the Superpave method: one with conventional neat binder (CAP), one polymer modified (AMP) and a third asphalt-rubber binder mix (AB), namely mixes A, B and C. The results indicated higher stiffness of the AMP mixture, which also presented greater fatigue life. Conversely, the specimens with CAP and AB demonstrated more ductility, with less microcracks propagation speed.

Downloads

Download data is not yet available.

Author Biography

Luiza Carbunck Godoi, Universidade Federal do Rio Grande do Sul

Laboratório de Pavimentação - UFRGS

References

Al-Qadi, I.; Ozer, H.; Lambros, J.; El Khatib, A.; Singhvi, P.; Khan, T.; Rivera, J. e Doll, B. (2015) Testing Protocols to Ensure Per-formance of High Asphalt Binder Replacement Mixes Using RAP and RAS. Illinois Center for Transportation. Research Re-port, No. FHWA-ICT-15-017.

AASHTO (2013) M 323: Standard specification for Superpave Volumetric Mix Design. Washington, DC.

AASHTO (2013) TP 105: Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semi-Circular Bend Geometry (SCB). Washington, DC.

AASHTO (2016) TP 124: Determining the Fracture Potencial of Asphalt Mixtures Using Semicircular Bend Geometry at In-termediate Temperature. Washington, DC.

AASHTO (2011) T 283: Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage. Test Standard Specifications for Transportation Materials and Methods of Sampling and Testing. Washington, DC.

Aragão, F.T.S.; Hartmann, D.A.; Kim, Y.R.; Motta, L.M.G. e Javaherian, M.H. (2014) A numerical-experimental approach to characterize fracture properties of asphalt mixtures at low in-service temperatures. Transportation Research Record: Journal of the Transportation Research Board, Washington, D.C. 2447, 42-50. https://doi.org/10.3141/2447-05

ABNT (2011) NBR 16018: Misturas asfálticas – Determinação da rigidez por compressão diametral sob carga repetida. Rio de Janeiro.

ABNT (2012) NBR 15087: Misturas Asfálticas – Determinação da Resistência à Tração por Compressão Diametral. Rio de Janeiro.

Balbo, J.T. (2000) Fatos, Mitos e Falácias sobre os Modelos Experimentais de Fadiga. In: Reunião Anual de Pavimentação, v. 1, p. 391-404, Brasília.

Balbo, J.T. (2007) Pavimentação asfáltica: materiais, projeto e restauração. Oficina de Textos, São Paulo.

Departamento Nacional de Infraestrutura de Transportes (2006) DNIT 031: Pavimentos Flexíveis – Concreto Asfáltico – Especificação de Serviço. Rio de Janeiro.

Departamento Nacional de Infraestrutura de Transportes (2009) DNIT 112: Pavimentos Flexíveis – Concreto asfáltico com asfalto-borracha, via úmida, do tipo “Terminal Blending” – Especificação de Serviço. Rio de Janeiro.

Elseifi, M. A.; Mohammad, L.; Yang, H. e Cooper, S. (2012) Modeling and evaluation of the cracking resistance of asphalt mix-tures using semi-circular bending test at intermediate temperatures. Road and materials and pavement design, 13, 124-139. DOI: 10.1080/14680629.2012.657035

European Committee for Standardization (2010) EN 12697-44: Bituminous Mixtures – Test Methods for Hot Mix Asphalt Part 44: Crack Propagation by Semi-Circular Bending Test. Brussels, Belgium.

Gao, L. e Ling, C. (2016) Evaluation of fatigue behavior in cold recycled mixture using digital image correlation method. Construction and Building Materials 102, 393-402. https://doi.org/10.1016/j.conbuildmat.2015.11.014

Godoi, L.G.; Brito, L.A.T. e Ceratti, J.A.P. (2017) Ensaio semicircular de flexão para análise da resistência ao trincamento de misturas asfálticas: validação e interpretação do procedimento. Congresso Íbero-Latinoamericano del Asfalto, Medellín, Colômbia.

Huang, B.; Shu, X. e Zuo, G. (2013) Using notched semi circular bending fatigue test to characterize fracture resistance of asphalt mixtures. In: Engineering and fracture mechanics 109, 78-88.DOI: 10.1016/j.engfracmech.2013.07.003

Kim, Y.R.; Little, D.N. e Song, I. (2003) Effect of mineral fillers on fatigue resistance and fundamental material characteristics – mechanistic evaluation. Transportation Research Record, Washington, DC, 1832, 1-8. https://doi.org/10.3141/1832-01

Li, X. J. e Marasteanu, M.O. (2010) Using the Semi Circular Bending Test to Evaluate Low Temperature Fracture Resistance for Asphalt Concrete. Experimental Mechanics, 50(7), 867-876. https://doi.org/10.1007/s11340-009-9303-0

Molenaar, A.A.A.; Scarpas, A.; Liu, X. e Erkens, S.M.J.G. (2002) Semi-circular bending test; Simple but useful. Journal of Associa-tion of Asphalt Paving Technologies, 71, 794-815.

Montestruque, G.; Vasconcelos, K.L. e Bernucci, L.L.B. (2010) Ensaio de flexão em amostra semi-circular com fenda e análise de imagens para caracterização da resistência à fratura de misturas tipo AAUQ. XXIV Anpet Congresso de Pesquisas e Ensino em Transportes, Salvador, Bahia.

Nsengiyumva, G. e Kim, Y.R. (2019) Effect of testing configuration in semi-circular bending fracture of asphalt mixtures: experiments and statistical analyses. TRB Annual Meeting, Washington, DC, 2673(5), 320-328.https://doi.org/10.1177/0361198119839343

Vargas, G.A.B; Oliveira, A.D e Aragão, F.T.S. (2018) Influência do modo de aplicação de carga nas propriedades de fratura de uma mistura asfáltica de agregados finos. Transportes, 26(3), 39 – 50. DOI: 10.14295/transportes.v26i3.1609

Downloads

Published

2019-12-28

How to Cite

Godoi, L. C., Brito, L. A. T., Mensch, N. G., & Ceratti, J. A. P. (2019). Utilização do ensaio de flexão sobre amostra semicircular para avaliação da propagação do trincamento em misturas com diferentes ligantes. TRANSPORTES, 27(4), 159–171. https://doi.org/10.14295/transportes.v27i4.1832

Issue

Vol. 27 No. 4 (2019)

Section

Artigos

License

Authors who submit papers for publication by TRANSPORTES agree to the following terms:

  1. Authors retain copyright and grant TRANSPORTES the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

  2. Authors may enter into separate, additional contractual arrangements for the non-exclusive distribution of this journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in TRANSPORTES.

  3. Authors are allowed and encouraged to post their work online (e.g., in institutional repositories or on their website) after publication of the article. Authors are encouraged to use links to TRANSPORTES (e.g., DOIs or direct links) when posting the article online, as TRANSPORTES is freely available to all readers.

  4. Authors have secured all necessary clearances and written permissions to published the work and grant copyright under the terms of this agreement. Furthermore, the authors assume full responsibility for any copyright infringements related to the article, exonerating ANPET and TRANSPORTES of any responsibility regarding copyright infringement.

  5. Authors assume full responsibility for the contents of the article submitted for review, including all necessary clearances for divulgation of data and results, exonerating ANPET and TRANSPORTES of any responsibility regarding to this aspect.